Angelcare AC315 Owner's Manual page 10

MOVEMENT ALARM
• If NO movement is detected after 15 seconds you will hear
a single 'TIC' pre-alarm sound from the Camera.
• If after a further 5 seconds there is still
NO movement detected both the Parent
Unit and Camera speakers will emit loud
continous beeps. - this is the movement
alarm.
• Movement Alarm icon will show on the LCD screen.
PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the cot, e.g. for feeding or comforting.
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement after
20 seconds/if baby is removed from the cot.
• Ensure to unpause the Sensor Pad before putting baby in the cot.
TO ACTIVATE/DEACTIVATE TIC FUNCTION:
Allows you to detect baby's movements as well as hear a TIC sound.
02:04 18°C
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
To ensure adequate monitoring of your child's movements, you can adjust the sensitivity of the
Sensor Pad in the main settings menu. Set a high sensitivity for a newborn and a lower sensitivity
as the child grows and gains weight. A thicker mattress will also need a higher sensitivity.
02:04 18°C
10
01m5_Manuel_AC315_UK_12703.indd 10
1) After activating the Sensor Pad, the alarm will sound
after 20 seconds.
2) Rub you hand over the mattress to confirm the alarm
stops.
PAUSE/UNPAUSE Sensor Pad Buttons
1) In the Sensor Pad settings, press the
activate/deactivate the Tic function (when activated
the toggle will turn blue).
2) Press the down arrow
bottom is highlighted in blue then Press the
2
to save the settings.
1) In the Sensor Pad settings, select the Sensor Pad
sensitivity bar.
2) Use the up/down arrows
level and confirm by pressing
3) Press down arrow
3
highlighted in blue then Press the
IF THE ALARM DOES NOT SOUND
• Avoid contact with the cot while
Sensor Pad is in operation.
• Place the cot near a supporting wall
to reduce vibrations.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF cot mobile, fans, loud music
or anything else that may cause
vibration.
18°C
button to
until the Save icon at the
to adjust the sensitivity
.
until the Save icon at the bottom is
button to save the settings.
button
2017-10-16 9:19 AM