Hitachi Freedom Storage Lightning 9900 V series Configuration Manual page 38

Red hat linux
Hide thumbs Also See for Freedom Storage Lightning 9900 V series:
Table of Contents

Advertisement

LAN
local-area network
LBA
logical block address
LDEV
logical device. An LDEV used by mainframe hosts can be called a device,
logical volume image (LVI) or a volume. An LDEV used by open-system
hosts is called a logical unit (LU).
LU
An LDEV used by open-system hosts is called a logical unit (LU). Open-
system fibre interfaces access LUs that are mapped to one or more LDEVs.
LUN
logical unit number is an identifying number for an LU.
LUN Manager
LUN Manager enables you to configure the 9900V fibre-channel ports for
operational environments, and restrict host access to LUs.
LUSE
LUN Expansion. This function allows you to concatenate two or more
volumes into a larger volume.
LVI
Logical Volume Image (also called device emulation)
MB
megabyte(s)
MIB
message information block
Open Volume
A suite of options that includes Virtual LVI/LUN and LUSE (LUN Expansion).
Management
Virtual LVI/LUN divides a logical volume for open-system into two or more
volumes. LUN Expansion allows you to concatenate two or more volumes
into a larger volume.
Parity group
A set of hard disk drives that have the same capacity and are treated as
one group. A parity group contains both user data and parity information,
which allows the user data to be accessed in the event that one or more of
the drives within the group are not available.
Performance
An option that includes Performance Monitor, CruiseControl, and Priority
Manager
Access. The Performance Monitor option monitors subsystem and volume
activity, and the Hitachi CruiseControl option performs automatic
relocation of volumes to optimize performance, and Priority Access***
RMI™
Remote Method Invocation. RMI™ is a remote procedure call, which allows
Java™ objects stored in the network to be run remotely.
R-SIM
remote service information message (generated by the 9900V when it
detects an error or service requirement).
SIM
service information message (generated by a subsystem when it detects an
error or service requirement).
ShadowImage
A program product that allows you to maintain subsystem-internal copies
of all user data for purposes such as data backup and duplication.
SNMP
simple network management protocol (part of the TCP/IP protocol suite)
SSID
storage subsystem ID. The 9900V is configured with one SSID for each 64
devices, and up to four SSIDs for each CU image.
SVP
Service Processor (this is the notebook computer that is inside the
RAID450).
TCP/IP
transmission control protocol/internet protocol
TID
target ID
Trap
An SNMP agent initiates trap operations when R-SIMs occur, in order to
send the R-SIMs to the SNMP manager (see Figure 4.1). An SNMP agent can
be configured to deliver traps to more than one SNMP manager.
Hitachi Lightning 9900™ V Series Red Hat
Linux
Configuration Guide
®
®
30

Advertisement

Table of Contents
loading

Table of Contents