Hitachi Freedom Storage Lightning 9900 V series Configuration Manual page 25

Red hat linux

Hide thumbs Also See for Freedom Storage Lightning 9900 V series:

Table of Contents

The following sample instructions apply to the JNI™ FCE6410 adapter. For instructions on

configuring other adapters, refer to the user documentation for the adapter.

To configure a JNI™ FCE6410 fibre-channel adapter connected to the 9900V:

1. Log in as an administrator.

2. To load a jnifc-2.2.14-5.0smp-vs module, edit the /etc/conf. modules by adding the

following line: alias scsi_hostadapter jnifc-2.2.14-5.0smp-vs

Note: jnifc-2.2.14-5.0smp-vs is an example of a module name for smp kernel. If you use

a different module name, change the name in the example accordingly.

Note: When you are loading the Qlogic

the JNI driver.

3. To set the topology with a directory including jnifc-2.2.14-5.0smp-vs.o, execute the

following command: insmod jnifc-2.2.14-5.0smp-vs.o jnil116x='lport:0'

Note: There is no way to verify the current setting on a module that has already been

loaded. To change the setting, unload the driver and execute the following command:

/sbin/rmod jnifc-2.2.14-5.0smp-vs.o.

4. Execute the following command to create boot image:

/sbin/mkinited

Note: jni_nport.img is an example. The file name is arbitrary.

5. Add the following lines to /etc/lilo.conf:

image=/boot/jni_nport.img

label= jni_nport

root=/dev/sda7

read-only

6. Execute /sbin/lilo.

7. Reboot the server.

Hitachi Lightning 9900™ V Series Red Hat

driver, comment out the description to not load

/boot/jni_nport.img

"2.2.14-5.0smp"

Linux

Configuration Guide

Table of Contents