Hitachi Freedom Storage Lightning 9900 V series Configuration Manual page 16

Fibre-channel adapters. Make sure to install all utilities/tools for the adapter. Do not
install/load the driver(s) yet (see below). For information on driver requirements for the
adapters, please refer to the user documentation for the adapter or contact the vendor.
– The 9900V subsystem supports: 2 Gbps fibre-channel interface, including shortwave
non-OFC (open fibre control) optical interface and multimode optical cables with LC
connectors; and 1 Gbps fibre-channel interface, including shortwave non-OFC optical
interface and multimode optical cables with SC connectors. Do not connect any OFC-
type fibre-channel interface to the 9900V subsystem.
– For information on supported FC adapters (FCAs), optical cables, hubs, and fabric
switches, please contact your Hitachi Data Systems account team or the Hitachi Data
Systems Support Center (see section 5.2). For other information on supported fibre-
channel adapters and driver requirements, please refer to the user documentation
for the adapter or contact the vendor.
Drivers. Do not install/load the driver(s) yet. Section 2.5 provides instructions on
loading the drivers with the correct parameters and options for operation with the 9900V
subsystem.
Hitachi Lightning 9900™ V Series Red Hat Linux Configuration Guide
® ®
8