Standards - Siemens SINAMICS G130 Operating Instructions Manual

2.3

Standards

Note
The standards listed in the table below are non-binding and do not in any way claim to be
complete. The standards listed do not represent a guaranteed property of the product.
Only the statements made in the Declaration of Conformity shall be deemed binding.
Table 2- 2 Fundamental, application-relevant standards in succession: EN, IEC/ISO, DIN, VDE
Standards* Title
EN 1037 Safety of machinery; avoiding unexpected starting
ISO 14118
DIN EN 1037
EN ISO 9001 Quality management systems - requirements
ISO 9001
DIN EN ISO 9001
EN ISO 12100-x Safety of Machinery; General Design Guidelines;
ISO 12100-x Part 1: Basic terminology, methodology
DIN EN ISO 12100-x Part 2: Technical Principles and Specifications
EN ISO 13849-x Safety of machinery; safety-related parts of control systems;
ISO 13849-x Part 1: General basic design principles
DIN EN ISO 13849-x Part 2: Validation
EN ISO 14121-1 Safety of Machinery - Risk Assessment;
ISO 14121-1 Part 1: Guidelines
DIN EN ISO 14121-1
EN 55011 Industrial, scientific and medical high-frequency devices (ISM devices) -
CISPR 11 radio interference - limit values and measuring techniques
DIN EN 55011
VDE 0875-11
EN 60146-1-1 Semiconductor converters; general requirements and line-commutated converters;
IEC 60146-1-1 Part 1-1: Defining the basic requirements
DIN EN 60146-1-1
VDE 0558-11
EN 60204-1 Electrical equipment of machines;
IEC 60204-1 Part 1: General definitions
DIN EN 60204-1
VDE 0113-1
EN 60228 Conductors for cables and insulated leads
IEC 60228
DIN EN 60228
VDE0295
EN 60269-1 Low-voltage fuses;
IEC 60269-1 Part 1: General requirements
DIN EN 60269-1
VDE 0636-1
Cabinet design and EMC
Operating Instructions, 03/2013, A5E00427629A
General
2.3 Standards
11