Standards - Siemens SINAMICS S120 Equipment Manual

System overview

1.8 Standards

1.8 Standards
1.8
Table 1-1 Essentially, standards relevant to the particular application
Standards Title
EN 292-1 Safety of machines; general design guidelines;
Part 1: General terminology, methodology:
EN 292-2 Safety of machines; general design guidelines;
Part 2: Technical principles and specifications
EN 563 Safety of machines; temperature of surfaces that can be touched; ergonomic data to define the
temperature limit values for hot surfaces
EN 755-9 Aluminum and aluminum alloys - extrusion-pressed bars, pipes and profiles - profiles, limiting
dimensions and form tolerances
EN 954-1 Safety of machines - safety-related parts of control systems;
Part 1: General principles for design
EN 1037 Safety of machines; avoiding unexpected starting
EN 55011 Industrial, scientific and medical high-frequency devices (ISM devices) - radio interference - limit
values and measuring techniques
EN 60146-1-1 Power semiconductor converters; general requirements and line-commuted converters;
Part 1-1: Defining the basic requirements
EN 60204-1 Electrical equipment of machines;
Part 1: General definitions
IEC 60228 Conductors for cables and insulated conductors; guidelines for the limiting dimensions of round
cables
EN 60269-1 Low-voltage fuses -
Part 1: General requirements
IEC 60287-1 to -3 Cables - calculating the rated currents
Part 1: Rated current equations (100% load factor) and calculating the losses
Part 2: Thermal resistance
Part 3: Main sections for operating conditions
EN 60529 Degrees of protection provided by enclosures (IP code)
EN 60664-X Insulation coordination for electrical equipment in low-voltage systems
Part 1: Basics, requirements and tests
Part 3: Use of coatings or encapsulation to protect against the accumulation of dirt
EN 60721-3-X Classification of environmental conditions
Part 3-0: Classes of environmental influencing quantities and their limit values; introduction
Part 3-1: Classes of environmental influencing quantities and their limit values; long-time storage
Part 3-2: Classes of environmental influencing quantities and their limit values; transport
Part 3-3: Classes of environmental influencing quantities and their limit values; stationary use,
weather-protected
EN 61000-6-X Electromagnetic compatibility (EMC)
Part 6-1: Generic standard; noise immunity for residential areas, business and trades areas as well
as small facilities
Part 6-2: Generic standards; noise immunity for industrial areas
Part 6-3: Generic standards; generic standard noise emission for residential areas, business and
trades areas as well as small facilities
Part 6-4: Generic standards; generic standard noise emission for industrial areas
EN 61140 Protection against electric shock; common requirements for systems and equipment
EN 61158 Digital data communications in the process technology - fieldbus for industrial control systems
1-12
Equipment Manual for Booksize Power Units
Equipment Manual, (GH2), 03/2006 Edition, 6SL3097-2AC00-0BP3