Digital Watchdog DWC-VS753WT Manual page 23

MOTION
The camera can detect motion and display an alarm on the screen.
Motion detection settings must be adjusted for each sensor.
DET. WINDOW
- WINDOW ZONE: Select a zone to setup from the 4 zones available.
- WINDOW USE: Enable or disable the selected motion zone.
- DET H-POS: Move the Zone left or right. The higher the number, the zone will move to the right.
- DET V-POS: Move the Zone up or down. The higher the number, the zone will move down.
- DET H-Size: Adjust the zone's size horizontally. The higher the
number, the right side panel will move further to the right.
- DET V-Size: Adjust the zone's size vertically. The higher the
number, the bottom side panel will move further down.
SENSITIVITY
The smaller the movement you want to detect, the higher the sensitivity value must be.
MOTION OSD
If enabled, the text MOTION ZONE will appear on the screen indicating the area of motion detection.
TEXT ALARM
Setup a text to appear on the screen when motion is detected explaining the alarm situation.
- WINDOW MOTION: Will appear when a motion alarm is detected.
- CAMERA MOVING: Will appear if the camera is shaken abruptly.
- BRIGHT CHANGE: Will appear if the brightness in the scene changes suddenly and drastically.
23