Installing Options
Installing the CPV5300 DIMM
4
4-2
You do not need tools for this procedure.
1. Remove power from the chassis and disconnect all power cords.
2. Remove the CPV5300 from the chassis.
3. Locate the DIMM sockets on the CPV5300. Refer to Figure 3-1.
4. Hold the DIMM so the keyed notch aligns with the tab on the socket.
5. Insert the DIMM at a 90 degree angle. Refer to Figure 4-1.
Figure 4-1. Inserting a DIMM
6. Gently push the DIMM in until the ejector ears lock in place.
7. Install the CPV5300 in the chassis and connect the power cords.
8. Apply power to the chassis.
At bootup the BIOS automatically detects the new memory configuration.
RELEASE TABS
2413 9811