Motorola CPV5300 CompactPCI Installation Manual page 70

A
Table A-20. Signal Descriptions for CPV5300 SBC (J4)/CPV5300 TM (P4)
Signal
SCSI
Video
A-26
Pin Assignments for CPV5300 SBC and CPV5300 TM Backplane Connectors
Backplane Connector Pin Assignments (Continued)
Signal
Mnemonic
ATN driven as an initiator when a special condition
occurs
BSY driven by initiator as a hand-shake during arbitration
CD indicates command or message phase when asserted,
data phase when deasserted
IO indicates the in direction when asserted, out
direction when deasserted
MSG indicates a message phase when asserted and a
command/data phase when deasserted
SACK initiator asserts ACK to indicate a byte is ready for
or was received from the target
SCD[15:0] SCSI data lines
SCDPH provides odd parity for SCD[15:8}
SCDPL provides odd parity for SCD[7:0]
SEL driven after a successful arbitration to select as an
initiator or reselect as a target
SREQ a target asserts REQ to indicate a byte is ready or is
needed by target
SRST interpreted as a hard reset
BLUE blue signal
DACVSS video return
HSYNC horizontal synchronization
GREEN green signal
DDCCLK display Data Channel clock signal for DDC2
support
DDCDAT display Data Channel data signal for DDC2 support
RED red signal
VSYNC vertical synchronization
Signal Description