Removing And Installing Devices While The Computer Is Turned Off - Dell Latitude D505L User Manual

Using the Module Bay
1 status button on the
battery charge gauge
2 second battery (bottom)
Removing and Installing Devices While the Computer Is
Turned Off
CAUTION: Before performing any of the following procedures, read and follow the safety
instructions in the System Information Guide.
NOTE: If the device screw is not installed, you can
running and connected to a docking device (docked).
Your computer ships with an optical drive installed in the module bay. However, the device screw is not
installed in the optical drive but packaged separately. When you install your device in the module bay, you can
install the device screw.
NOTE: You do not need to install the device screw unless you want to secure the module inside the
computer for security purposes.
If the Device Screw Is Not Installed
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. Press the device latch release so that the latch release pops out.
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hh433D.htm
remove and install devices while the computer is
Page 2 of 12
9/19/2003