Table of Contents
Advertisement
Using the Module Bay
Using the CD or DVD Tray
NOTICE:
Do not press down on the drive tray when opening or closing it. Keep the tray closed when
you are not using the drive.
NOTICE:
Do not move the computer while playing CDs or DVDs.
1. Press the eject button on the front of the drive.
2. Pull the tray out.
3. Place the disc, label side up, in the center of the tray.
NOTICE:
Ensure that you snap the disc onto the spindle. Otherwise you may damage the drive tray, or
your CD or DVD will not work properly.
4. Snap the disc onto the spindle.
1
eject button
5. Push the tray back into the drive.
NOTE:
If you use a module that shipped with another computer, you need to install the drivers and
software necessary to play DVDs or write data. For more information, see the Drivers and Utilities CD.
You can play a DVD on your computer if the computer shipped with a DVD drive or a CD-RW/DVD combo
drive. You can write data to a CD-R/CD-RW on your computer if the computer shipped with a CD-RW or CD-
RW/DVD combo drive.
For more information on playing CDs or DVDs, click Help on the CD player or DVD player (if available).
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hh433D.htm
Page 10 of 12
9/19/2003
Advertisement
Table of Contents
