Table of Contents
Advertisement
Using the Module Bay
1
device latch release
2. Pull the device by the latch release to remove the device from the module bay.
3. Insert the new device into the bay, push the device until you feel a click, and push the device latch
release in so that it is flush with the computer.
If the Device Screw Is Installed
1. Save and close any open files, exit any open programs, and then shut down the computer.
2. If the computer is connected to a docking device (docked), undock it. See the documentation that came
with your docking device for instructions.
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hh433D.htm
Page 3 of 12
9/19/2003
Advertisement
Table of Contents
