Table of Contents
Advertisement
Using the Module Bay
4. Pull the device by the latch release to remove the device from the module bay.
5. Insert the new device into the bay, push the device until you feel a click, and push the device latch
release in so that it is flush with the computer.
6. When the operating system recognizes the new device, click Close.
If the Device Screw Is Installed
Windows XP
1. Double-click the Safely Remove Hardware icon on the taskbar.
2. Click the device you want to eject.
3. If the computer is connected to a docking device (docked), undock it. See the documentation that came
with your docking device for instructions.
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
4. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer.
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hh433D.htm
Page 7 of 12
9/19/2003
Advertisement
Table of Contents
