Dell Latitude D505L User Manual page 58

Connecting to a Wireless Local Area Network
NOTE: Your computer can take up to 1 minute to connect to the network.
6. Click OK.
Your network setup is complete.
Connecting to a Network With Wired Equivalent Protocol (WEP)
Security Requirements
1. In the Preferred networks section, click the name of your wireless network.
2. Click Properties.
3. From the Network Authentication drop-down menu, select Open.
Earlier versions of Dell wireless software may not contain the drop-down menus. If you are using an
earlier version, click to check the check box labeled Data encryption (WEP enabled) and go to
step 5.
4. From the Data encryption drop-down menu, select WEP.
5. If the wireless network does not require a network key (for example, a password), go to
6. Click to uncheck the check box labeled The key is provided for me automatically.
7. Enter the WEP network key, provided by your network administrator, in the Network key field.
8. Enter the WEP network key again in the Confirm network key field.
NOTE: Your computer can take up to 1 minute to connect to the network.
9. Click OK.
Your network setup is complete.
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hhCB5E.htm
Page 4 of 4
step 8.
9/19/2003