Table of Contents
Advertisement
Using the Module Bay
4. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer.
1
device latch release
5. Press the device latch release so that the latch release pops out.
6. Pull the device by the latch release to remove the device from the module bay.
7. Insert the new device into the bay, push the device until you feel a click, and push the device latch
release in so that it is flush with the computer.
8. When the operating system recognizes the new device, click Close.
Using CDs or DVDs
file://C:\Documents%20and%20Settings\rpaxman\Local%20Settings\Temp\~hh433D.htm
Page 9 of 12
9/19/2003
Advertisement
Table of Contents
