Selecting A Station - Dab - Roberts Blutune 5 Manual

Selecting a station - DAB

1. Press On/Standby to switch on the radio.
2. Press Mode until the 'DAB' mode is selected.
3. Rotate Tuning to step through the list of available stations.
4. Press Tuning to select and tune to the desired station.
5. Adjust the Volume.
Note: If after selecting a station the station does not tune it may be
necessary to relocate your radio to a position giving better reception.
Secondary services - DAB
Some radio stations may have one or more additional broadcasts associated
with them. If these are available, they will appear immediately after the
main station as you rotate the Tuning control clockwise. To tune to the
selected service, press Tuning.
Finding new stations - DAB
As time passes new stations may become available or you may have
moved your radio to a different part of the country. In this case you may
need to cause your radio to scan for new stations.
1. Press On/Standby to switch on the radio.
2. Press Mode until the 'DAB' mode is selected.
3. To scan, apply a long press on the Tuning control.
4. Alternatively, to scan using the DAB menu, press Menu. The display
will show 'SCAN'. Press Tuning.
5. Your radio will perform a scan of the Band III DAB channels. As new
radio stations are found the station counter on the right-hand side of
the display will increase and the radio stations will be added to the
list stored in the radio.
DAB
DAB
DAB
DAB
8