When The Alarm Sounds; Cancelling Alarms - Roberts Blutune 5 Manual

When the alarm sounds

setting procedure. When your radio is set to wake by the radio alarm, your radio will switch to the selected radio station. If the radio cannot connect to
Note: If the radio is switched on because of a radio alarm you can control basic functions such as the volume control.
back to standby mode when the alarm duration has elapsed.

Cancelling alarms

1. Whilst an alarm is sounding, press On/Standby to cancel the alarm.
2. If the snooze feature is not required, then setting the snooze option to 'OFF' will allow other controls also to be used to
cancel an alarm (see page 22).
To set the alarm duration
The alarm duration is adjustable and can only be set while the radio is
playing (default duration is 60 minutes).
1. With your radio switched on, press Menu. The menu will show on the
display.
2. Rotate Tuning until 'SYSTEM' appears on the display. Press Tuning.
3. Rotate Tuning until 'ALARM' appears on the display. Press Tuning.
4. Rotate Tuning to choose the desired alarm duration from between 30,
60, 90 and 120 minutes. Press Tuning. The radio will exit the menu.
The chosen duration setting will be used for all subsequent alarms.
21
DAB
DAB
DAB