Language Function - Roberts Blutune 5 Manual

Display backlight dimmer
The brightness of the display can be adjusted for when the radio is in standby or when
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness
level than the standard setting. There are four standby brightness levels and four
levels for when the radio is in use.
To change the current brightness setting please follow these steps.
1. If your radio is in the standby mode or playing, press the Dimmer button to choose
the High, Mid, Low or Off dimmer setting.
2. Alternatively to adjust the brightness using the menu, press Menu.
3. Choose 'SYSTEM' and then 'DIMMER'.
4. To adjust the display brightness when the radio is switched on select 'NORMAL'.
To adjust the display brightness when the radio is in Standby select 'STANDBY'.
Press Tuning to enter the selected brightness adjustment mode.
5. Choose the High, Mid, Low or Off dimmer setting.
Note that the backlight is almost completely off at the Off setting.
6. Press Tuning to set the level. Press Menu as needed to exit.
When the radio is in standby and powered from the mains pressing any button (except
the Dimmer or Alarm buttons) or the rotary controls will cause the radio to switch to
the 'High' brightness level for a few seconds. This is so that if the standby brightness
level is set to Low or Off, it is still possible to see the time when needed.

Language function

1. Press On/Standby to switch on the radio.
2. Press Menu.
3. Rotate and press the Tuning control to select
'LANGUAGE' and then select your desired language.
4. The display will change to the chosen language.
5. Press Menu as needed to exit.
DAB
DAB
DAB
DAB
DAB
DAB
DAB
26