Roberts Blutune 5 Manual page 24

Disable alarms
1. Apply a long press on the Alarm 1 or Alarm 2 button. '
2'
2. Press Tuning to enter the alarm setting menu.
3. Rotate Tuning
4. Press Tuning to disable the alarm.
Enable or disable alarms
(see page 19), you may quickly enable or disable that alarm by means of a short
press on the appropriate alarm button as follows.
1. Press and release the Alarm 1 or Alarm 2 button. The display will show
2. Rotate Tuning
3. Press Tuning
before showing the time.
4. If Tuning is not pressed, the current alarm setting will not be changed. After
a few seconds the display will go back to showing the time.
23