Preset Stations - Roberts Blutune 5 Manual

Storing a preset using the menu (presets 1 - 10)
1. Press On/Standby to switch on the radio.
3. Tune to the required station as previously described.
4. Apply a long press on the Preset button. The display will show, for
example, 'EMPTY 7' if no station has been stored to that preset.
5. Rotate the Tuning control to scroll through the preset list until you
reach an unused preset or a preset that you wish to change.
6. Press the Tuning control to store the preset. The display will show
for example 'P7 SAVED'. The station will be stored under the chosen
preset.
7. Repeat this procedure as needed for the remaining presets. Stations
which are already stored in the presets may be overwritten by following
the above procedure.
Recalling a preset using the menu (presets 1 - 10)
1. Press On/Standby to switch on the radio.
3. Press and release the Preset button. If a preset has been stored, then
the display will show either the station name (for DAB stations) or the
4. Rotate the Tuning control to highlight the desired preset station.
5. Press the Tuning control.
6. Your radio will then tune to the station stored in the selected preset
memory.
Mode button.
Mode button.
FM
FM
FM
FM
FM
14