Replacing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the touchpad on the palm-rest assembly.
2
Align the screw holes on the touchpad with the screw holes on the palm-rest
assembly.
3
Replace the four screws (M2x2.5) that secure the touchpad to the palm-rest
assembly.
4
Slide the touch-pad cable into the connector on the system board and close the
latche to secure the cable.
5
Adhere the tapes that secure the touchpad to the palm-rest assembly.
Post-requisites
1
Replace the
status-light
2
Replace the battery.
3
Replace the
base
58
computer. After working inside your computer, follow
After working inside your
board.
cover.
computer. For more safety best
www.dell.com/
Before