Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
Route the display cable through the routing guides on the display panel.
Slide the display cable into the connector and press down the latch to secure the
Slide the sensor-board cable into the connector on the sensor board and press
down the latch to secure the cable.
Adhere the sensor-board cable tape.
Adhere the tape that secures the display cable to the display panel.
Follow the procedure from step 4 to step 6 in
Replace the camera.
Replace the battery.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
"Replacing the display