Download Print this page

Dell Inspiron 13 5000 Service Manual: Removing The System Board

2-in-1.
Hide thumbs

Advertisement

Removing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
memory
4
Remove the fan.
5
Remove the
heat
Procedure
1
Peel the tape that secures the display cable and touch-screen board-cable to the
system board.
2
Open the latches to disconnect the display cable and the touch-screen board-
cable from the system board.
3
Open the latch to disconnect the I/O-board cable from the system board.
70
computer. After working inside your computer, follow
After working inside your
cover.
modules.
sink.
computer. For more safety best
www.dell.com/
Before

Advertisement

   Related Manuals for Dell Inspiron 13 5000

Comments to this Manuals

Symbols: 0
Latest comments: