Removing the hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
CAUTION: Hard drives are fragile. Exercise care when handling the hard
CAUTION: To avoid data loss, do not remove the hard drive while the
computer is in sleep or on state.
Remove the battery.
Peel off the tape that secures the hard-drive cable to the palm-rest assembly.
Using the pull tab, disconnect the hard-drive cable from the system board.
Remove the two screws (M2x3.5) that secure the hard-drive assembly to the
computer. After working inside your computer, follow
After working inside your
computer. For more safety best