Removing The Status-Light Board - Dell Inspiron 13 5000 Service Manual

Removing the status-light board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1 Remove the base
2 Remove the battery.
Procedure
1 Open the latch and disconnect the status-light board-cable from the system
board.
2 Peel the tape that secures the status-light board cable to the palm-rest
assembly.
52
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before