Inspection And Maintenance Work Overview - Vaillant ecoCRAFT exclusive VKK GB 1206/3-E R1 Installation And Maintenance Instructions Manual

Appendix
Code Parameter
D.80 Operating hours, heating
D.81 Operating hours, hot water genera-
tion
D.82 Number of burner start-ups in heat-
ing mode
D.83 Number of burner start-ups in hot
water mode
D.84 Maintenance indicator: Number of
hours until the next maintenance
D.87 Gas type setting
D.90 Status of digital controller
D.91 Status of DCF with external temper-
ature sensor connected
D.93 Unit variant setting (DSN)
D.95 Software version of the eBUS com-
ponents
D.96 Default setting
D.97 Activating the installer level
D.98 Telephone number in the plain text
display
D.99 Language for the plain text display
Inspection and maintenance work – Overview
D
Note
The table below lists the manufacturer requirements with respect to minimum inspection and maintenance inter-
vals. If national regulations and directives require shorter inspection and maintenance intervals, you should ob-
serve these instead of the intervals listed in the table.
34
Values or explanations
In hours (h)
In hours (h)
Number of burner start-ups (x 100)
Number of burner start-ups (x 100)
Adjustment range: 0 to 3000 hrs and "---" for deactivated
300 equals 3000 hrs
Adjustment range:
0 = Natural gas
0 = Not recognised (eBUS address ≤ 10)
1 = Recognised
0 = No reception
1 = Reception
2 = Synchronised
3 = Valid
80 kW: 0
120 kW: 1
160 kW: 2
200 kW: 3
240 kW: 4
280 kW: 5
1. PCB (BMU)
2. Display (AI)
Reset all adjustable parameters to factory setting
0 = No
1 = Yes
Service code 17
Input option for the telephone number that you want to
display if a fault occurs
Installation and maintenance instructions ecoCRAFT exclusive 0020149561_01
Default set-
Own setting
ting
After press- Not
ing the i but- adjustable
ton once, the
first three
numbers are
displayed;
after press-
ing the i but-
ton a second
time, the
second three
numbers of
the six-di-
git number
(burner starts
x 100) are
displayed.
„---"
0
Not
adjustable
Not
adjustable
Not
adjustable
0