Vlan Port Configuration - Phoenix Contact FL SWITCH SMN 6TX/2POF-PN User Manual

8089_en_03
8.4.2

VLAN port configuration

Port-specific VLAN settings can be made on this web page.
Figure 8-4 VLAN port configuration
If "Ingress Filtering" is set to "Enable", the switch rejects data packets received at this port if
the port is not a "tagged member" or "untagged member" of the VLAN with the VLAN ID con-
tained in the tag of the packet.
Port priority
– A corresponding tag indicating the priority is added to packets without tags.
Port VLAN ID
– Assignment of received, untagged packets to a VLAN. The corresponding VLAN ID
must be set for the ports that are "untagged members" of a VLAN (see "Example: Com-
munication between termination devices via VLAN" on page 153).
Only IDs of existing VLANs can be set as the port VLAN ID. If a VLAN is deleted, all port
VLAN IDs that are set to this VLAN are reset to the default VLAN ID "1".
8.4.3 VLAN port configuration table
This web page provides an overview of the main VLAN settings for the ports. Clicking on the
relevant port number opens the "VLAN Port Configuration" web page, where the settings
can be modified.
This table can be used to assign incoming packets to the created VLANs if the packets
reached the port without a VLAN tag.
Virtual Local Area Network (VLAN)
PHOENIX CONTACT
151