8089_en_03
6.4.2
MRP configuration
The "MRP Configuration" web page is used to configure the protocol parameters. The fol-
lowing configuration parameters are displayed:
–
Device role (disabled, MRP client or MRP manager)
–
Selection of the ring ports that are integrated in the MRP ring
–
Selection of the VLAN ID for tagging mode
Figure 6-6
"MRP Configuration" web page
6.4.2.1
Using MRP in VLAN mode
When using VLANs, a standard tag with the highest priority is assigned to the MRP packets.
In addition, a VLAN ID can be specified in the MRP configuration. Only static VLAN entries,
which are listed in WBM under "Switch, VLAN, Static VLAN", can be used. The tag is only
added to the MRP packet if the port to which the MRP packet is sent is operating in tagging
mode.
Media Redundancy Protocol (MRP)
PHOENIX CONTACT
137