Dynamic Multicast Groups - Phoenix Contact FL SWITCH SMN 6TX/2POF-PN User Manual

Smart Managed Compact Switch
IGMP on Layer 3
144
PHOENIX CONTACT
Figure 7-3 Configuration example
Possible redundant paths resulting from Rapid Spanning Tree must be taken into consid-
eration for multicast group creation.
7.4

Dynamic multicast groups

7.4.1 Internet Group Management Protocol (IGMP)
The Internet Group Management Protocol describes a method for distributing information
via multicast applications between routers and terminal devices at IP level (Layer 3).
8089_en_03