Static Vlans - Phoenix Contact FL SWITCH SMN 6TX/2POF-PN User Manual

Smart Managed Compact Switch
150
PHOENIX CONTACT
8.4.1

Static VLANs

Static VLANs can be created on this web page. Up to 31 new VLANs can be created
(VLAN 2 to VLAN 32). If more are created, a corresponding message will be displayed.
VLAN 1 is always created statically and all ports are added to it as untagged members. By
default upon delivery, network-based management interfaces (WBM, Telnet, and SNMP)
are available from VLAN 1.
Figure 8-3 "Static VLANs" menu
On this web page you can create static VLANs by assigning a VLAN ID and VLAN name.
The ports are then assigned to the individual VLANs by selecting the relevant VLAN and
clicking on the character in the "Ports 1-8" line that indicates the current port status. Various
options are selected by clicking on the status several times. By selecting "toggle all", all
available ports in the relevant port group change their status.
The possible states are:
U = Untagged
Ports with "Untagged" status belong to the selected VLAN and packets are sent to this port
without VLAN tag. An "Untagged" port cannot belong to multiple VLANs - otherwise there is
no logical division (except VLAN 1)
F = Forbidden
Ports with the "Forbidden" status do not belong to the selected VLAN and cannot be added
dynamically to this VLAN via GVRP.
- = None
Ports with "None" status are not integrated into the VLAN.
8089_en_03