Trouble Shooting - Speco HTB11TM Instruction Manual

Trouble Shooting

●
PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly
and the surface of
the camera is hot.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen flickers.
The INTENSIFY does
not work.
POSSIBLE CAUSE
FCheck the power cable, power supply output and video
connection between the camera and monitor.
FAre the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
FAdjust the monitor controls, as required.
FIf the camera is facing a very strong light, change
the camera position.
FAdjust the lens focus.
FAdjust the contrast control of the monitor.
FIf there is an intermediate device, correctly set the 75Ω/Hi-z.
FCheck the camera is correctly connected to an appropriate
regulated power source.
FHas MOTION DET been set to ON in the menu?
FHas MD AREA been properly defined?
FCheck the settings in WHITE BALANCE menu.
FMake sure that the camera isn't facing direct sunlight or
fluorescent lighting. If necessary,change the camera position.
FCheck that the AGC setting in the EXPOSURE menu is not set to OFF.
FCheck the EXPOSURE menu and make sure SHUTTER is set to------.
- 33 -
Motorized Zoom Focus TVI Camera