Trouble Shooting - Speco Intensifier K Glacier Series Instruction Manual

Trouble Shooting

PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly
and the surface of
the camera is hot.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
VFUHHQ ÀLFNHUV
The INTENSIFY does
not work.
POSSIBLE CAUSE
)Check the power cable, power supply output and video
connection between the camera and monitor.
)Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
)Adjust the monitor controls, as required.
)If the camera is facing a very strong light, change
the camera position.
)Adjust the lens focus.
)Adjust the contrast control of the monitor.
),I WKHUH LV DQ LQWHUPHGLDWH GHYLFH FRUUHFWO\ VHW WKH Ÿ+L]
)Check the camera is correctly connected to an appropriate
regulated power source.
)Has MOTION DET been set to ON in the menu?
)+DV 0' $5($ EHHQ SURSHUO\ GH¿QHG"
)Check the settings in WHITE BALANCE menu.
)Make sure that the camera isn't facing direct sunlight or
ÀXRUHVFHQW OLJKWLQJ ,I QHFHVVDU\FKDQJH WKH FDPHUD SRVLWLRQ
)Check that the AGC setting in the EXPOSURE menu is not set to OFF.
)Check the EXPOSURE menu and make sure SHUTTER is set to------.
36