Toshiba dynaEdge DE-100 Series User Manual page 78

Table of Contents

Advertisement

BIOS
Problem
The computer
cannot be powered
on
Internal Storage Drive
Problem
Computer does not
boot from internal
storage
Slow performance
Memory Media Card
For further information, refer to
Problem
Memory media card
error occurs
User's Manual
Procedure
Disconnect the AC adaptor and remove the battery
for several seconds. Then reinstall the battery and
reconnect the AC adaptor. After that, press the
power button.
If it does not work, press the power button twice
again.
If it still does not work, press and hold the power
button for 12 seconds.
Real-Time Clock (RTC) information might be
cleared if the power is turned on by pressing the
power button. You should set the system date/time
manually in TOSHIBA Setup Utility.
If it still does not operate properly, you should
contact your reseller or dealer.
Procedure
Check to see whether there is a disc in the external
optical disc drive - if so remove it and try to start
the computer again.
If this has no effect, check the Boot Setting setting
within the TOSHIBA HWSetup.
You should perform a Windows Factory Reset
following instruction in
Operating
Basics.
Procedure
Remove the memory media card from the
computer and then reinsert it to ensure that it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
System
Recovery.
6-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynaedge de-10 seriesDynaedge de-105 series

Table of Contents