Pointing Device; Usb Mouse - Toshiba dynaEdge DE-100 Series User Manual

Problem
You cannot read a
file

Pointing device

If you are using a USB mouse, you should also refer to both the
mouse

USB mouse

Problem
Mouse pointer does
not respond to
mouse operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
User's Manual
Procedure
Check to ensure that the required file is actually on
the memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
section and the documentation supplied with your mouse.
Procedure
In this instance, the system might be busy.Try
moving the mouse again after waiting a short
while.
Remove the mouse and then reconnect it to a free
USB port in order to ensure that it is firmly
attached.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1.
2.
3.
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1.
2.
3.
To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Buttons tab.
Set the double-click speed as required and
click OK.
To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Pointer Options tab.
Set the mouse pointer speed as required and
click OK.
USB
6-8