Lan Port - Toshiba dynaEdge DE-100 Series User Manual

LAN port

The LAN port on the USB Type-C™ adapter supports Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per
second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T).
This section describes how to connect/disconnect to a LAN.
User's Manual
Do not connect a USB hub to the USB 3.0 port of the USB Type-C™
adapter. Be sure to connect it to the USB 3.0 port on the computer
itself.
USB-C™ to HDMI™/VGA Travel Adapter
This adapter provides: USB Type-C™ port (Power Delivery Charging),
VGA monitor port, HDMI™ output port, USB 3.0 port and LAN port.
Figure 4-6 USB-C™ to HDMI™/VGA Travel Adapter
2
3
1. USB Type-C™ port (Power
Delivery Charging)
2. LAN port
3. Universal Serial Bus (USB 3.0) port
The output resolution of HDMI™ output port on this adapter is up to
3840x2160 @30Hz, and output resolution of VGA monitor port on this
adapter is up to 1920x1200 @60Hz.
The HDMI™ and VGA ports cannot be used simultaneously.
The USB Type-C™ port (Power Delivery Charging) on this adapter
does not function on your computer. It is used for connecting AC
adaptor for some other TOSHIBA computers only.
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature. Wake-up on LAN is only supported under sleep mode.
The Link speed (10/100/1000 megabits per second) changes
automatically depending on the network conditions (connected device,
cable or noise and so on).
1
4
5
4. HDMI™ output port
5. VGA monitor port
4-14