System Recovery - Toshiba dynaEdge DE-100 Series User Manual

Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a
moment to save the current data in memory to the internal storage drive.
After you turn off the computer, and the content of memory has been saved
to the internal storage drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

System Recovery

There is a hidden partition allocated on the internal storage drive for the
System Recovery Options in the event of a problem.
You can also create recovery media and restore the system.
The following items are described in this section:
System Recovery Options
The System Recovery Options feature is installed on the hard disk when
shipped from the factory. The System Recovery Options menu includes
tools to repair startup problems, run diagnostics, or restore the system.
See the Windows Help and Support content for more information about
Startup Repair.
The System Recovery Options can also be run manually to repair
problems.
The procedure is as follows. Follow the instructions shown on the on-
screen menu.
1.
2.
3.
4.
Check your Windows
system (including the system image backup feature).
Creating Recovery Media
This section describes how to create Recovery Media.
User's Manual
System Recovery Options
Creating Recovery Media
Restoring the pre-installed software from your created Recovery
Media
Restoring the pre-installed software from the Recovery Partition
Turn off the computer.
While holding the F8 key on the USB keyboard, turn on the computer.
The Advanced Boot Options menu is displayed. Use the arrow keys
to select Repair Your Computer and press ENTER.
Follow the on-screen instructions.
®
manual for more information on backing up your
2-10