Battery Pack - NTT docomo P07-C Instruction Manual

Battery Pack

Installation/Removal of Battery Pack
Q Installation/removal of the battery pack must be performed with the
power OFF.
Installation of Battery Pack
1
Lift up the back cover from the concave in the
direction of the arrow to remove it
2 Align the tab side of the battery pack with the
compartment in the FOMA terminal. Then press it in
the direction 1 and push it in the direction 2
2
22
Preliminary Check
Slot
Arrow marks
1
3 Ensure right orientation of the back cover and align
it with the main body. Then press the both sides of
the body (A) firmly and press down the top (B) and
bottom (C) parts securely to install the cover
Q Ensure that there is no clearance between the main body and
back cover.
B
Removal of Battery Pack
1
Remove back cover (z
Battery Pack" on page 22)
2 Lift the battery pack in the direction of the arrow
using the projection of it
Projection
A
C
Z step 1 in "Installation of