Handling Precautions - NTT docomo P07-C Instruction Manual

Handling Precautions

General Notes
■ Do not wet the equipment.
The FOMA terminal, battery, AC adapter cable,
and UIM are not waterproofed. Do not use
them in environments, which are high in
humidity such as in bathrooms, and do not
allow them to get wet from rain. Furthermore, if
carrying them against your body, they become
moist due to perspiration and the internal parts
may become corroded, causing malfunction. If
the parts are found to have been damaged due
to exposure to the liquids, any repairs will not
be covered by warranty, or repairs may not be
possible. This may be repaired at a cost if
repairs are possible.
■ Use a dry soft cloth such as the one for
cleaning glasses to clean the equipment.
Q The display may be scratched if it is rubbed
hard with a dry cloth.
Q Stains may result from droplets of water or dirt
if they are left on the display.
Q Do not use alcohol, thinner, benzene,
detergent or other solvents for cleaning,
otherwise the printing may be removed or
discoloration may result.
■ Occasionally clean the terminals of the
equipment using a dry cotton swab, etc.
The soiled terminals deteriorate the connection
and might cause power discontinuity or
incomplete charging. Wipe the terminals with a
cotton swab, etc.
Take care not to damage the terminals when
cleaning them.
■ Do not place the FOMA terminal near an
air conditioner outlets.
Condensation may form due to rapid changes
in temperature, and this may corrode internal
parts and cause malfunction.
■ Do not apply excessive force onto the
FOMA terminal and battery pack.
If you put the FOMA terminal in a bag along
with many other articles or sit with the FOMA
terminal in a clothes pocket, the display,
internal circuitry and the battery pack could be
damaged or malfunction.
Also, if an external device is left connected to
the connector terminal (earphone/ microphone
terminal), the connector could be damaged, or
malfunction.
■ Do not rub or scratch the display part
with metals.
Doing so might cause damage to the part,
resulting in trouble or malfunction.
■ Carefully read each instruction manual
attached to battery pack or AC adapter
cable.
Notes on Handling the FOMA
Terminal
■ Never forcibly press the surface of the
touch panel, or operate it with something
having a sharp point like a claw, ballpoint
pen, or pin.
Damage to the touch panel might result.
■ Avoid using in extremely high or low
temperatures.
The FOMA terminal should be used within a
temperature range of 5 °C to 35 °C and a
humidity range of 45 % to 85 %.
■ If the FOMA terminal is operated near a
land-line phone, television set, radio or
other devices in use, it may adversely
affect the devices. Operate the FOMA
terminal as far away from these devices
as possible.
■ It is recommended that you make
separate notes of the information stored
in the FOMA terminal and keep such
notes in a safe place.
We take no responsibility for any loss of the
stored data items.
■ Do not drop the FOMA terminal or subject
it to strong impacts.
Malfunction or damage may result.
■ Do not insert an external device to the
connector terminal at a slant when
connecting, and do not pull it out when it
is inserted.
Malfunction or damage may result.
■ The FOMA terminal becomes warm
during use or charging but this is not an
abnormality. Use the FOMA terminal as it
is.
■ Do not leave the camera in places
exposed to direct sunlight.
Pixels may be discolored or burns may result.
■ When using the FOMA terminal, ensure
that you close the cover for the
connector terminal.
Dust or water might enter into the FOMA
terminal, causing malfunction.
■ Do not use the FOMA terminal with the
back cover left removed.
The battery pack might come out, or
malfunction or damage may result.
13