NTT docomo P07-C Instruction Manual page 133

1 [Change start time]
Q Rewriting start time setting screen is displayed.
Q Time is aligned with the clock of P-07C.
2 Enter preferred time
Q Set time.
Q Tap [+]/[-] to change update schedule and then tap [OK].
At Scheduled Time
1
[Start rewriting] appears
W
[OK]
W
[OK]
Q After about 3 seconds after [Start rewriting] is displayed, software
update is automatically started.
Q Home screen should be displayed in a location subject to strong
radio wave signals at the scheduled time for software update.
Q If the battery level is not sufficient for software update at the
scheduled time, software update will be performed at the same
time on the following day.
Q If OS upgrading is in process at the scheduled time, software will
not be updated.
Q If an alarm is set at the same time as the scheduled update time,
software update is given priority.
Q If P-07C power is OFF at the scheduled software update time,
software update will be performed at the same time as the
scheduled time after next activation.
Software Update for Upgrading Features
W A x
1 Home screen
W
phone] [Upgrade features]
server]
W
2
[Software Update]
Update file is downloaded.
3 Open the notification panel
4
[Update Now]
The FOMA terminal is restarted and rewriting starts. Once rewriting
is completed, the FOMA terminal is reactivated and
the status bar.
Q If you select [Update later], take Step 3 through 5 when you
update the system.
5
Open notification panel
W
[OK]
W W
[Settings] [About
W
[Update from
[Yes]
W
Tap notification
appears in
W
Confirm rewriting result
Appendix
131