NTT docomo P07-C Instruction Manual page 82

Object The focus frame follows the movement of the
selected object to focus on it.
Face Detect and focus on human face(s).
Continue Always focus on objects in the focus frame and
shooting is performed without focusing operation
when the shutter button is tapped. This helps
focusing on a moving object.
Macro Focus on a close object.
Touch The focus frame moves to the tapped point to be
focused.
■
Setting in setting panel
1
Still image/video shooting screen
operations listed below:
Scene *1 Select a mode corresponding to the situation and
object.
Effect Shoot an image with optional effects such as
monochrome and sepia.
Set the time length to automatic shutter release.
Self Timer *1
Photo Resolution *1 Set photo size (resolution).
Photo Quality Set quality.
White Balance Correct color in accordance with surrounding light
source.
Set ISO sensitivity.
ISO *1
Red Eye Remove *1 Turn red eye remove function on/off.
Delighting *1 Turn on/off the function to delight any dark part.
GPS Location *1 Set whether or not to attach the location information.
Show Grid Set whether to display/hide grid line.
*1
80
Multimedia
Audio Record
Review
Shooting Mode
Reset
*1
*2
Still Image Shooting
Operations in case the shooting mode is "Normal Shot" and focus
mode is "Auto" are described below:
W W
Perform
1
2
Video Shooting
1
2
*2 Set whether or not to record voice.
Set whether to display/hide review screen after
shooting.
*2 Set whether or not to shoot a video to attach to
Email.
Restore the factory shooting settings.
Still image shooting only
Video shooting only
Still image shooting screen
W
within the focus frame
When it comes into focus, the focus frame turns to green.
Shutter sound is generated and the shot still image is stored in
microSD card.
If [Review] is on, the preview screen appears.
W
Video shooting screen
W
screen
The recording start sound is generated and video shooting starts.
Recording end sound is generated and the shot video is stored in
microSD card.
If [Review] is on, the preview screen appears.
W
Align the object
Display the object in the