DEVI DEVIlink FT Installation Manual page 5

DEVIlink™ FT
1. Comfort heating: Constant temperature on the floor
in bathrooms and other rooms where a comfortable
warm surface is required. Install the Floor sensor and
choose Floor regulation for the room when doing the
configuration.
2. Total heating: Control of room temperature in living
rooms etc. Install the floor sensor and a DEVIlink™
RS. Choose Combined regulation when doing the
configuration on the DEVIlink™ CC.
3. No floor sensor: A floor sensor is not present, and
cannot be installed. You must install a DEVIlink™ RS.
Choose Room regulation.
Be aware that temperature control is less accurate without
the floor sensor and that all DEVIlink™ FTs in a room need to
havethe same sensor configuration.
DEVI recommends always installing a floor sensor.
Do not install floor heating system without a floor sensor
when the heating element is installed on or beneath wooden
surfaces and other surfaces sensitive to temperature!
Installation Guide 5