Changing The Language - Western Digital My Passport Wireless Pro User Manual

Username
Settings Password
Device Name

Changing the Language

1. In the Language section select the language in which you want the dashboard
screens to appear.
2. Click .
Save
Specifying Types of Access
1. In the Access section, view or modify the following security access settings:
SSH
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
Identifies the administrator's user name which is
To set or change a password for accessing the dashboard:
▪ To set a password, click the toggle button to
▪ Enter a password in New Password and Confirm Password.
Click the Show Password checkbox to see the password
◦
you're entering.
▪ Click Save .
If desired, enter a new name for your My Passport Wireless Pro/My
Passport Wireless SSD drive. This is the name you see on the
network identifying your drive for connections and for accessing
content stored on the drive.
Secured Shell protocol. SSH is a troubleshooting and analysis
On
interface.Turn this option
command-line operations. It is disabled by default.
Do not use this option unless you have knowledge and
Warning:
experience using SSH.
Please note that modifying or attempting to modify this
Warning:
device outside the normal operation of the product
voids your WD warranty.
▪ To enable SSH, click the toggle button to
▪ In the SSH screen that displays, note the User Name and Password,
click the I Accept check box, and click
Performing Administrative Functions
Admin
On
.
to securely access your drive and perform
On .
OK
.
.
42