Wi-Fi Led - Western Digital My Passport Wireless Pro User Manual

LED Behavior/Color
Blue (blinking for 5 seconds)
Off

Wi-Fi LED

The Wi-Fi LED is off when you take the My Passport Wireless Pro/My Passport
Wireless SSD drive out of the box.
LED Behavior/Color
Off
Blinking Blue
Solid Blue
Fast-Blinking Blue
LED Activity During SD/USB Import
LED Behavior/Color
Drive Status LED blinking blue
Battery Status LEDs 1 through 4 blinking blue in
succession
All four Battery Status LEDs are blinking blue
after: 1) import button pressed, or 2) SD/USB
inserted for auto import
Other LED Behavior
LED Behavior/Color
All LEDs fast blinking blue
All LEDs blinking blue in one long (3 sec) and 3
short blinks.
Drive Status LED blinking blue
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
LED Lights On
1st
----
Indicates ...
Wi-Fi not active (device is off)
Device is booting up, connecting to wireless, or shutting down.
Wireless network connected or active (all modes)
Wi-Fi Protected Setup (WPS) is initiated and in progress
Indicates...
The SD or USB device is being mounted. The
content database is building.
Content is importing to the My Passport Wireless
Pro/My Passport Wireless SSD device.
The import process has failed. Check the web
dashboard for more information.
Indicates...
Device has a problem. Contact WD Support.
Device in recovery mode. This process may be
necessary if the device has bad or corrupted
configuration settings, or the drive has failed.
Firmware update in progress; File I/O in SD
card/USB port syncing; Mounting USB storage;
Scanning SD card
Understanding the LEDs and Buttons
Indicates...
The USB host port is unavailable
due to low battery (less than
15%).
Directly Attached to Storage
(DAS): The device is directly
connected to a computer and
not being charged.
6