Updating Firmware - Western Digital My Passport Wireless Pro User Manual

12

Updating Firmware

This chapter includes the following topics:
Viewing the Firmware Version
Updating with Available Firmware
Performing a Manual Update
The Firmware page allows you to automatically or manually check for an update file
and then install it. To check automatically and install an available file, the drive must
be connected to the Internet.
The current version and last update display in the Version section of the Firmware
page.
Warning:
Important:
Viewing the Firmware Version
1. On the Dashboard, click
2. In the Version area, the Current Version field identifies the firmware version
currently installed on your device. The Last Update field identifies when the last
firmware update occurred.
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
Do not power off your drive during firmware installation. When
the installation is finished, your drive will automatically reboot.
You can only update your device if the battery is more than 50
percent charged or the charger is plugged into a power outlet.
on the Navigation bar.
Firmware
Updating Firmware
46