Buttons - Western Digital My Passport Wireless Pro User Manual

Buttons

Power button
SD Card Backup /
WPS / Battery button
My Passport Wireless Pro/My Passport Wireless SSD
User Manual
Turns the drive on and off and wakes the drive from
standby mode:
▪ To turn on from standby, momentarily push until
lights start blinking.
▪ To turn off, push for approximately 3 seconds.
▪ With an SD card inserted in the slot, press for 2
seconds to start SD card transfer. When you do
this, the battery LEDs will "count up" to indicate
the transfer progress.
▪ Connects to a router using WPS.
▪ Press and hold approximately 5 seconds to start
WPS.
▪ When the drive is off, press to show battery status
briefly.
▪ Press momentarily for other devices to connect to
the My Passport Wireless Pro/My Passport
Wireless SSD directly when it is connected to
another wireless network.
Understanding the LEDs and Buttons
7