Wohler RMT-173-RM User Manual page 11

Rmt-173 series. dual input, lcd, multi-viewer audio/ video monitors
Hide thumbs Also See for RMT-173-RM:
Table of Contents

Advertisement

IMD: The 16 characters of the in-monitor display (IMD) can be
displayed in red, green, yellow, or white.
DISPLAY
,
IMD COLOR
The IMD menu defines the dynamic
Timecode: The display format for the timecode is HH: MM: SS: FF.
In the event no timecode is available, the monitor will display
--:--:--:--. Time code is currently available for SD/HD-SDI ANC-
packetized and D-VITC for SD-SDI.
Input: Pressing this button displays the Source menu. Further
presses cycle through available main video inputs. Alternately the
Up/Dn keys can be used.
F1 through F5: These buttons serve as programmable hot keys.
Pressing a Function key displays the Function menu. Pressing the
key again toggles the state of that function. Refer to the
Key Menu on page 25
Menu: Pressing this button displays the on-screen display
. Press
Menu
MENU
mode.
MENU
Up and Down: After pressing the
Down
to move within submenus.
ENTER: After pressing the
selects the current menu or menu option. Changes are previewed,
but not saved, until you press the
When the OSD Menu is not displayed, you can press the
button to quickly adjust the following parameters.
: Adjusts the volume from 0 to 30.
VOLUME
BRIGHTNESS
where 50 is the typical value.
CONTRAST
: Adjusts the image contrast from 0 to 100, where
50 is the typical value.
CHROMA
: Adjusts the color saturation from 0 to 100, where
50 is the typical value.
Power LED: Lights red in standby mode and green when on. When
no main input signal is present, it blinks green.
POWER (front): Toggles the monitor to on or standby mode.
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
, and
IMD CHAR
define the static operation.
IMD
for details.
again to revert one menu level or exit out of
MENU
button, pressing this button
MENU
ENTER
: Adjusts the video brightness from 0 to 100,
8 21 10 0:
RMT-173 Series
F r o n t P a n el F ea t u r e s
OSD CONFIG IMD
and
tally operations.
OSD
Function
(OSD)
button, press
or
Up
button again.
ENTER
R MT-1 73 S e r ie s U se r G u id e
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmt-173-tt

Table of Contents