Contec DIO-3232LX-USB User Manual page 12

- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
- If you use this product in a noisy environment, attach the bundled ferrite core to stabilize the
operation.
When attaching a ferrite core to the USB cable, coil it around once near the connector while leaving
it open, and then close it.
FCC PART 15 Class A Notice
NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be requiredto correct the
interference at his own expense.
WARNING TO USER
Change or mo difications not expressly approved the manufacturer can void the user's authority to operate this
equipment.
DIO-3232LX-USB
1. Before Using the Product
7