Displaying Snmp Status - Cisco Catalyst 3550 series Software Configuration Manual

Chapter 27 Configuring SNMP

Displaying SNMP Status

To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command. You can also use the
other privileged EXEC commands in
the fields in the output displays, refer to the Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1.
Table 27-5 Commands for Displaying SNMP Information
Feature
show snmp
show snmp engineID [local | remote]
show snmp group
show snmp user
78-11194-09
Table 27-5 to display SNMP information. For information about
Default Setting
Displays SNMP statistics.
Displays information on the local SNMP engine and all
remote engines that have been configured on the device.
Displays information on each SNMP group on the network.
Displays information on each SNMP user name in the
SNMP users table.
Catalyst 3550 Multilayer Switch Software Configuration Guide
Displaying SNMP Status
27-17