Displaying The Mst Configuration And Status - Cisco Catalyst 3550 series Software Configuration Manual

Chapter 17 Configuring MSTP

Displaying the MST Configuration and Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 17-4 Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface. Valid interfaces
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the command reference for this release.
78-11194-09
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
include physical ports, VLANs, and port channels. The valid VLAN range
is 1 to 4094; the valid port-channel range is 1 to 64.
Catalyst 3550 Multilayer Switch Software Configuration Guide
Displaying the MST Configuration and Status
Table 17-4:
17-23