Vmps Configuration Example - Cisco Catalyst 3550 series Software Configuration Manual

Chapter 12 Configuring VLANs

VMPS Configuration Example

Figure 12-5
In this example, these assumptions apply:
•
•
•
•
•
Figure 12-5 Dynamic Port VLAN Membership Configuration
station 1
station 2
78-11194-09
shows a network with a VMPS server switch and VMPS client switches with dynamic ports.
The VMPS server and the VMPS client are separate switches.
The Catalyst 6000 series Switch 1 is the primary VMPS server.
The Catalyst 6000 series Switch 3 and Switch 10 are secondary VMPS servers.
End stations are connected to the Catalyst 3550 clients, Switch 2 and Switch 9.
The database configuration file is stored on the TFTP server with the IP address 172.20.22.7.
Primary VMPS
Server 1
Dynamic-access port
End
Catalyst 6000 series
Secondary VMPS
Server 2
Dynamic-access port
End
Catalyst 6000 series
Secondary VMPS
Server 3
Catalyst 6000 series
172.20.26.150
Switch 1
Catalyst 3550 switch
client
172.20.26.151
Switch 2
Trunk port or
static-access port
172.20.26.152
Switch 3
172.20.26.153
Switch 4
172.20.26.154
Switch 5
172.20.26.155
Switch 6
172.20.26.156
Switch 7
172.20.26.157
Switch 8
Catalyst 3550 switch
client
172.20.26.158
Switch 9
Trunk port or
static-access port
172.20.26.159
Switch 10
Catalyst 3550 Multilayer Switch Software Configuration Guide
Configuring VMPS
TFTP server
Router
172.20.22.7
12-35